KTM 150 XC-W 2019

Produktinfo

MINIMAL FUSS, MAXIMUM FUN

The KTM 150 XC-W really is in a class of its own. Picking up where the iconic 200 XC-W left off, the 150 XC-W has the gap between 125 and 250 2-strokes firmly in its crosshairs. The ‘XC’ means cross-country, while the ‘W’ represents its wide-ratio transmission, giving it longer legs on faster sections while still maintaining low-down torque.

Motor og eksos

Motor og Eksos

With the agility of a screaming 125 and enough muscle to take the fight to the 250 cc 4-Strokes, the engine in the 150 XC-W punches well above its weight. This 150cc ripper has been developed with the latest KTM engineering know-how and the most advanced technology available. The results: whopping power and mountain-conquering torque across the entire rev range, while being extremely compact and light.

TRANSMISSION

A wide-ratio 6-speed Enduro transmission was designed specifically for the small 2-stroke Enduro engine, its gear ratios perfectly in sync with the 150’s power band. The latest production technologies allowed for compact dimensions and minimal weight. Keeping safety in mind, an advanced ´No Dirt´ gear shift lever design prevents muck from blocking the joint. Because […]

PISTON

This little gem is optimized for maximal reliability and its shape fits brilliantly to the state-of-the-art cylinder layout.

IGNITION

All 2-stroke models feature a CDI control unit with an advanced hardware which improves the starting behavior of the engine. The ignition curves remain unchanged.

EXHAUST

The engineers meticulously tuned the pipe for maximum power, so this little screamer is as tough as it is strong.

E-STARTER

The design of the 150cc engine offers a home to the best perk in the dirt bike world: an E-starter powered by a reliable lithium ion battery. This magic button´s benefits are clear, especially for those of you looking to compete on an extreme level.

CYLINDER

This compact cylinder with a 58mm bore features a cutting-edge power valve unit with a sophisticated mechanism for the lateral support exhaust ports. Matched to a twin-component cylinder head, it is KTM’s secret to all-round grunt. The layout of the water jackets in the cylinder and head guarantees efficient heat dissipation when you’re riding at […]

CRANKSHAFT

A reliable piece of engineering that has been skillfully balanced to guarantee minimal vibrations. It allows a decrease of the displacement to 125cc just by replacing cylinder, piston and head. There’s no more need to change the crankshaft. Two-in-one in no time.

CRANKCASES AND ENGINE COVERS

Lightweight, die-cast crankcases featuring a high crankshaft and clutch shaft position, located close to the center of gravity, which results in optimal mass centralization and outstanding rideability. In addition, the engine body is extremely lightweight and compact, while still able to house an E-starter. And because looks matter, the engine covers feature an advanced surface […]

COOLING

KTM’s proven cooling system routes the coolant from the cylinder head through the frame triangle, directly to aluminum radiators made by WP. Thanks to flow optimized internal circulation and CFD-calculated ventilation, the system is superbly efficient. In addition,the radiator protectors improve heat dissipation. Especially in the mud. They are also integrated into the front part […]

CLUTCH

The clutch is activated by a hydraulic system made by Brembo. This reliable and self-adjusting unit guarantees light operation and highly controllable modulation.

CARBURETOR

The KTM 150 XC-W is fitted with a MIKUNI TMX carburetor. This 38mm flat slide carb lives to provide smooth and controllable power all the way up to the rev limitation.

Chassi

Chassi

KTM engineers have ensured that the KTM 150 XC-W retains the same agility and manoeuvrability as the rest of the XC-W range, making light work of hard enduro.

WHEELS

The XC-W wheels feature lightweight, CNC machined hubs and high-end Giant rims guaranteeing maximum stability at minimum weight. The wheels are fitted with the latest Dunlop tires. Take them wherever you like, traction will be waiting.

TRIPLE CLAMP

The XC-Ws are fitted with forged triple clamps with an offset of 22mm, ensuring a solid grip of the fork and precise handling. The handlebar is adjustable forwards and backwards over 4 positions, so the XC-W will fit you like your favorite gloves.

SWINGARM

This design allows for an optimized mounting position of the PDS shock absorber, providing more progressive action. Furthermore, the cast aluminum design guarantees low weight and a perfect flex behavior. The single-component casting process also eliminates any inconsistencies and inherent weak points created by welding. And it’s better looking.

REAR SUSPENSION

The PDS is kind of a KTM trademark where the shock absorber is directly connected to the upper side of the swingarm. This setup boasts the best possible mounting geometry and provides amazingly progressive damping. The shock absorber is mounted close to the centerline, which means nearly symmetrical loads for the swingarm and frame and […]

FUEL TANK

A lightweight polyethylene tank with a capacity of 10 liters. You will always be able to see how much fuel there’s left at a glance, thanks to the see-through plastic. By pushing the orange release button in the center of the fuel tank cap, the bayonet mechanism makes refueling quick and easy.

FRONT SUSPENSION

The WP XPlor 48 upside-down fork is a split fork developed by WP in close collaboration with KTM. It is fitted with a spring on both sides but features separated functions for each fork leg: compression damping is fitted on the left side, while rebound is on the right. The forks can easily be adjusted […]

FRAME

The high-tech, lightweight chrome-moly steel frame has a knack for easy handling, outlandish rideability, precise cornering and excellent stability. You can also count on high torsional rigidity and low longitudinal stiffness. This results in better absorption of the energy created from the front and rear suspension sucking up jumps and bumps. In short: more comfort […]

BRAKES

You can’t brake any harder, better, faster or stronger. High-tech Brembo calipers are combined with lightweight Wave brake discs. The steel-flex front brake hose has efficient protection and there’s an integrated channel for the speedometer cable. First you outrun them, then you outbrake them.

AIRBOX

The air filter box design offers maximum protection of the air filter against soiling, while ensuring maximum airflow in a quiet way. The large Twin Air filter is mounted in a stiff cage, which at the same time holds the system in place. This design is so simple, you could still pop a fresh one […]

Ergonomi og komfort

Ergonomi og komfort

Top factory racers have added their input and imparted many years of experience to design the range to be perfectly suited for faster terrain. This means riders are able to move more freely while hauling across fast terrain.

HANDLEBAR

KTM engineers know how to handle handlebars. This tapered unit, made of high-strength aluminum by NEKEN, features a throttle assembly with a robust aluminum body and easy free-play adjustment. An ODI volcanized grip sits on the right, while on the left side of the bar a comfortable ODI lock-on grip requires no glue or wire […]

FOOTPEGS

Sophisticated ´No Dirt´ footpegs prevent smudging up the pegs, even when digging in deep ruts. The pegs on the Enduro models are 6mm higher than the ones used on SX versions, which benefits ground clearance. But you can swap them at will.

Bodywork og dekaler

Bodywork og dekaler

Perfect ergonomics and contact points provide maximum comfort in movement on the KTM 150 XC-W. I-beam structures on the front and rear fenders ensure maximum stability at speed, and keep the weight low. The fenders also stay cleaner for longer with a smart design that expels mud and grime.

DECALS

New graphics convey the READY TO RACE character of the 2019 KTM XC-W model line.

Programvare og elektronikk

Programvare og elektronikk

The KTM 150 XC-W features all the latest technology, but in a dramatically stripped-down, READY TO RACE fashion. Lights on the front and rear ensure riders some peace of mind when the going gets tough and the suns starts to set.

BATTERY & WIRING HARNESS

These engines are fitted with KTM’s proven E-starter – a unique KTM feature and a major benefit at all levels of offroad racing. A super compact lithium ion battery breathes life into the engine, while offering three times the starting energy of a conventional battery. The battery and wiring harness are centralized in a compartment […]

Tekniske detaljer

TECH DETAILS

Engine
Design
1-cylinder, 2-stroke engine
Displacement
143.99 cm³
Bore
58 mm
Stroke
54.5 mm
Starter
Kick and electric starter
Transmission
6-speed
Clutch
Multi-plate clutch, Brembo hydraulics
EMS
Kokusan
Chassis
Frame design
25CrMo4 steel central-tube frame
Rear suspension
WP Xplor PDS shock absorber
Suspension travel (front)
300 mm
Suspension travel (rear)
310 mm
Front brake
Disc brake
Rear brake
Disc brake
Front brake disc diameter
260 mm
Rear brake disc diameter
220 mm
Chain
X-Ring 5/8 x 1/4″
Steering head angle
63.5 °
Ground clearance
370 mm
Seat height
960 mm
Tank capacity (approx.)
10 l
Weight READY TO RACE (without fuel)
91.5 kg
0