KTM 890 DUKE 2021

Produktinfo

THE SUPER SCALPEL

The KTM ​8​90 DUKE ​redefines the word ‘sharp’ by adding an extra edge. Powered by an 889 cc parallel-twin nestled into one of the lightest and most compact chassis around, the KTM 890 DUKE boasts the agility you’d expect from a 600 cc​, ​but with the ​meaty punch of a bigger twin. ​It doesn’t rewrite the mid-sized naked bike rule book. It obliterates it. ​

Motor og eksos

Motor og Eksos

The LC8c engine shares a great deal of its ferocity with the ultra-sharp KTM 890 DUKE R. Boasting a hard-hitting 115 Hp and 92 Nm, this compact, liquid-cooled 8 valve powerplant, is the most compact twin in class punching way above its weight in terms of output.

Ride-by-wire

Instead of the electronic injection system’s throttle valves being controlled by cables, ride-by-wire processes throttle twist grip movements with the help of electronic sensors and activates the throttle valves accordingly using servo motors. However, our ride-by-wire on the KTM 890 DUKE goes the extra mile: It electronically translates the throttle commands of the rider into […]

Pistons

Bigger box pistons, but lesser weight and oscillating mass sit at the heart of the KTM 890 DUKE. Featuring a pin bearing with bronze bushing, providing better frictions and maximizing the rev-ceiling of the engine.

PASC clutch

The slipper clutch allows riders to enter corners confidently without locking up the rear wheel under hard deceleration or when downshifting, while remaining feather-light on the clutch finger.

Oil circulation

The engine employs a compact, semi-dry sump system with oil being actively pumped out of the crank case, clutch housing, and gearbox. This ensures any unnecessary oil flow through the motor, reducing power loss through friction. To cool down the oil, the engine is equipped with an oil cooler similar to that fitted to the […]

Exhaust

A stainless-steel thing of beauty. The middle damper centralizes mass and allows for a relatively small muffler that plays a dramatic soundtrack. Hundreds of test bench runs and complex simulations ensured that this exhaust system contributes decisively to the tractable torque curve and excellent emission standards.

Cylinders

Coated aluminum cylinders are an integral part of the sleeveless engine casing design of this 889 cc parallel twin. This open deck cylinder construction allows for optimal cooling, improved production tolerances and reliability.

Cylinder heads

The 8 valve DOHC cylinder head contains twin chain-driven camshafts and one sparkplug per cylinder. Additionally, the camshafts in the KTM 890 DUKE are assembled, which makes them even lighter than forged camshafts. DLC coated finger followers, steel valves and a hydraulic chain tensioner complete the cylinder head assembly.

Crankcase

The KTM 890 DUKE features horizontally split crankcases, which are aluminum high pressure cast, allowing for reduced wall thickness, less weight and improved engine cooling.

Cooling

​A wider ​radiator with optimized airflow​ has been worked into the KTM 890 DUKE to ensure optimal cooling while things heat up on the street or track.

Balancer shafts

No one enjoys unpleasant vibes. That is why the KTM 890 DUKE employs the use of balancer shafts placed in front of the crankshaft and in the cylinder head to ensure the smoothest power delivery and minimal vibration.

Airfilter

Shorter intake funnels ​result in ​better throttle response​ from the subframe-fitted ​airbox​, while the air intake on the sides, allow​s​ the ​KTM 890 DUKE​ to keep things cool while you gun it.

Chassi

Chassi

The incredible handling characteristics of the KTM 890 DUKE are founded on the dynamic, loadbearing design of the tubular chassis. Engineers had one goal in mind, and that was to keep the chassis as rigid and compact as possible for sharper turn-in and greater lean angles, allowing it to slice through the turns with extreme responsiveness.

Wheels

The KTM 890 DUKE is fitted with extremely lightweight, light-alloy wheels manufactured in a low-pressure die casting process. Not only do the lightweight wheels make the bike lighter overall, they also minimize the unsprung masses and moment of inertia, with a positive impact on the handling and ride dynamics.

Triple Clamps

The cast aluminum triple clamp stiffness has been tuned to match the flex of the fork, contributing to the sporty handling and excellent feedback. Clever engineering of the triple clamps and the handlebar clamps mean four different handlebar positions are possible for that perfect riding position.

Tires

The KTM 890 DUKE is fitted with Continental ContiRoad rubber as standard. These feature ultra-fast warm-up technology, which boasts improved wet weather grip, increased durability, and stability, and offer natural, easy handling on all road surfaces.

SWINGARM

The die-cast, open-lattice swingarm is meticulously manufactured and has been optimized for stiffness and stability while still offering excellent flex characteristics. By using a direct link for the rear shock, complexity and parts are reduced.

Suspension

The KTM 890 DUKE boasts a WP suspension package which has been specifically developed to get the most of the power output and handling characteristics, with a dedicated factory setting, new springs, and additional basevalve fittings in the front fork.

Subframe

The subframe is cast aluminum and houses the airbox. No plastic covers, no additional brackets – everything is cast into two connected pieces to reduce complexity and weight. The triangular shapes in the subframe allow for a stronger, stiffer construction.

Steering damper

This reliable and sensitive WP steering damper is setup to give ultimate feedback to the rider, while keeping the front wheel steady and uncompromised over uneven tarmac. You won’t even know it’s there, until that one nasty bit of road comes up mid corner.

Rear shock

A high-quality gas-assisted WP Suspension rear shock absorber has been fitted with a new, lighter linear spring which, together with new factory settings, offers improved progression and overall comfort.

Fuel tank

The KTM 890 DUKE adds decent tank range to its arsenal with a 14 li​ter tank. We like to call it 14 liters of fury. ​​

Front fork

A set of WP APEX 43mm open cartridge upside-down forks take care of things up front, making use of split function technology. The front fork also adopts new linear springs which are not only lighter but also guarantee a more intuitive feel, while the added base valve improves high-speed damping.

Brakes

Maximum deceleration is ensured at the front wheel on the KTM 890 DUKE by two radially mounted four-piston fixed calipers​, revised brake pads​, and two 300 mm discs​.​ The ​rear​ brake features a single disc and a single-piston floating caliper. All this stopping power is supported by KTM’s Cornering ABS.

Ergonomi og komfort

Ergonomi og komfort

A tapered aluminum, 760 mm wide handlebar puts you in full control. It’s adjustable, with 4 positions on the triple clamp and can be rotated in three further positions for that perfect riding position.

Seats

At 820 mm, both shorter and taller riders can enjoy the bike at full tilt. The seat cover is grippy, allowing the rider to move around the bike easily. This has been developed to work with textile and leather, in keeping with the wide range of riders and riding styles. The pillion seat cover uses […]

Hand levers

The KTM 890 DUKE makes easy work of dialing in the controls with a set of adjustable brake and clutch levers, with careful consideration to ensure easy adjustment with gloves and while on the move.

Footpegs

Cast from aluminum, the foot pegs fitted to the KTM 890 DUKE cater to a comfortable riding position, while still creating maximum ground clearance allowing for impressive lean angles. Adjustable foot pegs are also available as a KTM PowerParts option for those who would like to go all out, and race-ready reverse shifting is also […]

Bodywork og dekaler

Bodywork og dekaler

Like all pilots, DUKE riders need easy access to information. In that regard, the KTM 890 DUKE features an intuitive multicolor, light variable TFT dashboard. Best of all, as the revs rise, the display bars change color to indicate when to shift, either spurring you on or warning you that the engine is too still cold for flat-out backroad attacks.

LED lights

The KTM 890 DUKE features a unique LED headlight with styling cues taken from THE BEAST itself. This high-performance LED headlight is flanked by two LED strips that function as daytime running lights, ensuring maximum illumination and attention. An LED taillight is also mounted to the KTM 890 DUKE – which will be seen the […]

Programvare og elektronikk

Programvare og elektronikk

The KTM 890 DUKE has adopted a vast swathe of rider aids found on the blistering KTM 890 DUKE R, and further refined them to be more user and road-friendly, without hindering any performance.

Track Mode (optional)

Available as an option, TRACK MODE allows more levels of customization, allowing riders – or racers in this instance – to tailor throttle control, traction control slip level, anti-wheelie functions and launch control as and when they need it.

Supermoto mode

SUPERMOTO MODE allows enthusiastic and experienced riders to lock up the rear wheel – a prerequisite for committed supermoto riding and deliberately executed slides. This means ABS is deactivated on the rear wheel, while maintaining ABS function on the front.

Ride Modes

Riders can choose from four ride modes, namely: SPORT MODE for more aggressive riding, STREET MODE for comfortable urban riding, RAIN MODE for when things get a little slippery, and the optional ultimate attack mode – TRACK MODE. This gives KTM 890 DUKE pilots full power output, the ability to dial down the traction control, […]

Quickshifter+ (optional)

The KTM 890 DUKE can be equipped with a race-derived Quickshifter+ as an option. This allows upshifting and downshifting to be executed without using the clutch lever, for quicker shift times, more precision when powering out of corners – and sounds pretty awesome too.

Motorcycle Traction Control (MTC)

The KTM 890 DUKE boasts a collection of advanced electronic wizardry which rivals some top-end sportbikes. Most crucially, is lean-angle sensitive Cornering MTC (Cornering Motorcycle Traction control), which reduces engine output at the faintest hint of wheel slip. This is done in an extremely smooth, barely perceptible interference allowing the rider to simply get on with […]

Motorcycle Stability Control (MSC) with cornering ABS

A key component of the comprehensive BOSCH MSC assistance package is the lean-sensitive cornering ABS. In a nutshell, this means riders have increased confidence during hard braking, even at extreme lean angles.

Motor Slip Regulation (MSR)

The KTM 890 DUKE can be equipped with MSR (Motor Slip Regulation) as an option, which works in the opposite direction of the Cornering MTC. This means there is no chance of accidentially locking up the rear wheel under downshifting or abrupt throttling-off. MSR ensures you retain full traction, complementing the fuction of the slipper […]

tilbehør

ACCESSORIES & LUGGAGE

You’ll find a full range of KTM PowerParts and luggage options available for the KTM 790 DUKE. Make aesthetic changes to intensify your ride, to reflect your personal attitude, fine-tune the function and adjust the performance to perfectly match your individual riding style. Wherever you ride and however you like to attack the turns, KTM PowerParts have you covered!

Tekniske detaljer

TECH DETAILS

Engine
TORQUE
92 Nm
TRANSMISSION
6-speed
COOLING
Liquid cooled
POWER IN KW
85 kW
STARTER
Electric starter
STROKE
68.8 mm
BORE
90.7 mm
CLUTCH
PASC™ antihopping clutch, mechanically operated
CO2 EMISSIONS
112 g/km
DISPLACEMENT
889 cm³
EMS
Bosch EMS with RBW
DESIGN
2-cylinder, 4-stroke, parallel twin
LUBRICATION
Forced oil lubrication with 2 oil pumps
FUEL CONSUMPTION
4.8 l/100 km
Chassis
FRAME DESIGN
Chromium-Molybdenum-Steel frame using the engine as stressed element, powder coated
SUSPENSION TRAVEL (FRONT)
140 mm
SUSPENSION TRAVEL (REAR)
150 mm
FRONT BRAKE
2x radially mounted 4 piston caliper
REAR BRAKE
2 piston floating caliper
FRONT BRAKE DISC DIAMETER
300 mm
REAR BRAKE DISC DIAMETER
240 mm
ABS
Bosch 9.1 MP (incl. Cornering-ABS and super moto mode)
CHAIN
520 X-Ring
STEERING HEAD ANGLE
66 °
GROUND CLEARANCE
191 mm
SEAT HEIGHT
820 mm
TANK CAPACITY (APPROX.)
14 l
DRY WEIGHT
169 kg
FRONT SUSPENSION
WP APEX 43
REAR SUSPENSION
WP APEX – Monoshock
Save & Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Save & Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)

0